Xi'an Desun Uniwill Electronic Technology Co., Ltd.
Our Vision Aspire to be a leader in water quality monitoring - our pursuit is to be respected by customers, employees, partners and other companies in the industry. Core Values Rigorous, Efficient,
Add to Cart
Desun Uniwill fluorescent dissolved oxygen sensors use a new generation of fluorescence lifetime technology and high performance fluorescent materials. No oxygen consumption,No flow rate limitation, no electrolyte, no maintenance and calibration,no interference from hydrogen sulfide, excellent stability. Built-in temperature sensor, automatic temperature compensation. RS485 output, can be networked without a controller.
Technical Specifications
| Item | Parameters |
| Model | DS380 |
| Principle | Fluorescence analysis method |
| Measuring range | 0~20mg/L or 0-200% saturation |
| Response time | 3 sec |
| Accuracy | 1% |
| Protection level | IP68 |
| Installation | Submersible |
| Temperature sensor | NTC |
| Temperature range | 0~50°C |
| Temperature accuracy | ±0.2°C |
| Output | Support RS-485, MODBUS protocol |
| Power supply | DC 6~12V, current <50mA |
| Size | Φ26*155 mm |
| Probe cable length | Default 5 m, customized 10m, 15 m and 30 m cable |
| Fluorescent cap life | 1 year |
| Maximum working pressure | 3bar |
| Housing material | SS316/Titanium alloy |
Sensor maintenance
1) Sensor outer surface:
Clean the outer surface of the sensor with tap water. If there is still debris left, wipe it with a soft cloth. For some stubborn dirt, add some household washing liquid to the tap water to clean it.
2) The outer surface of the fluorescent cap:
Remove the protective cover at the front end of the sensor, rinse the dirt on the sensor window with clean water, and finally cover the cover; if you need to wipe, use a soft cloth and carefully wipe the force direction.
Dimensions:
Photos