Xi'an Desun Uniwill Electronic Technology Co., Ltd.
Our Vision Aspire to be a leader in water quality monitoring - our pursuit is to be respected by customers, employees, partners and other companies in the industry. Core Values Rigorous, Efficient,
Add to Cart
| Item | Parameters |
| Model | DS380 |
| Principle | Fluorescence analysis method |
| Measuring range | 0~20mg/L or 0-200% saturation |
| Response time | 3 sec |
| Accuracy | 1% |
| Protection level | IP68 |
| Installation | Submersible |
| Temperature sensor | NTC |
| Temperature range | 0~50°C |
| Temperature accuracy | ±0.2°C |
| Output | Support RS-485, MODBUS protocol |
| Power supply | DC 6~12V, current <50mA |
| Size | Φ26*155 mm |
| Probe cable length | Default 5 m, customized 10m, 15 m and 30 m cable |
| Fluorescent cap life | 1 year |
| Maximum working pressure | 6bar |
| product material | POM/SS316/Titanium alloy |
| Calibration method | One or Two-point calibration |
| Power consumption | < 0.5 W |
Maintenance schedule
Unlike the electrochemically-dissolved oxygen probe technology, the fluori-dissolved oxygen probe does not consume oxygen and does not require frequent cleaning (except when applied to viscous liquids).
| Maintenance tasks | Recommended maintenance frequency |
| Cleaning sensor | Clean every 30 days |
| Check sensor and fluorescent cap for damage | Check every 30 days
|
| Replace the fluorescent cap | Change once a year |
| Calibrate the sensor (if required by the competent authority) | According to the maintenance schedule required by the competent authority |
Note:
The maintenance frequency in the above table is only a recommendation. Please maintain the sensor according to the actual usage of the sensor. However, the replacement of the fluorescent cap is recommended to be replaced once a year.
Feedback from customers
